2016-03-28 training log

Time for a change.

Things aren’t going well. My sleep’s been crap. Work’s been beyond stress. I’m not recovering well. Cut diet isn’t progressing at the desired rate. Nothing’s working. So, instead of continuing down the path, time for changes.

First change. Gym work is no longer Basebuilding. It’s good, but it’s simply not the level of volume I need to support the cut. Both in terms of work done in the sessions, but also work during the week. I was going to switch programming eventually anyways, but I just opted to start today.

Basic approach is hypertrophy stuff. Go 4x/week. Chest/shoulders, legs/lower, back, arms. Arms are important not for bro reasons, but because it provides me with a light day; so it’s still a day of work but it’s hardly a level of work compared to a squat session. Start off with something compound and heavy, work up, then everything after aims to be supportive. About 1 minute rest between sets, and yes, chase the pump. Just have fun. And that’s part of it for me — if I find that I want to just chase something, go for it. I’ve done things where I just did nothing but pullups and chinups until I couldn’t do any more. If I want to do that, do that. Tomorrow I’ll squat, and I want to focus on front squatting, and who knows… maybe I’ll want to front squat until I’m blue so I can work on lighter weight but finding the technique groove. And if that’s all I do, then that’s all I do. I want to have fun, chase the pump, get a bunch of work in, and just do whatever to help support the cut diet.

So with that, today went like this.

Hit inclines to start off. Worked up to a moderately heavy single, then an AMRAP+50%. Nice start. DB bench press next, but lowered the weight and focused on a 2(3)-0-1-0 tempo. I really wanted everything to have that larger focus on the eccentric, and it was good. Think muscle, not movement. Flies were a little light, because I found that fast a tempo was harder to hit on that — need to maybe make it like 4-0-2-1 — yes, really get that squeeze and pause at the top. But whatever the exact tempo, more eccentric.

DB Presses went the same: slower eccentric, really let the muscle work. Then DB lat raises. This was interesting because by the end of the presses I started to feel that weirdness in my neck/traps again. I know that with the raises I’ll tilt my head back a little bit — don’t do that. Just “look down” (not really, but have to think of it that way). That helped a lot. As soon as I finished the raises I immediately grabbed a 10# plate and did front raises until I couldn’t.

I shouldn’t have done triceps work, but I was winging it. After the 3rd set I cranked out what I could then ran the rack down to the 15# DB, getting 3-5 reps per poundage drop. Just go go until I couldn’t, crank as I could.

That’s the stuff I want to do. Just have some fun.

  • Incline Press
    • bar x 10
    • 95 x 5
    • 115 x 4
    • 135 x 3
    • 165 x 2
    • 185 x 1
    • 135 x 15
    • 135 x 7
  • DB Bench
    • 45e x 10
    • 45e x 10
    • 45e x 10
    • 45e x 8
    • 45e x 7
  • Machine Flies
    • 70 x 12
    • 70 x 12
    • 70 x 12
  • Seated DB Press
    • 35e x 10
    • 35e x 10
    • 35e x 10
    • 35e x 9
  • DB Lat Raises
    • 20e x 10
    • 20e x 10
    • 20e x 6, then immediately grabbed 10# plate and did front raises to failure (about 25 reps)
  • Overhead Triceps extensions
    • 40 x 20
    • 40 x 13
    • 40 x 12, then ran the rack down to 15# getting about 3-5 reps per drop

Where do I need more work? weak-hand and 25 yards, of course

A couple days ago I posted a simple accuracy drill from Claude Werner (by way of Dr. Sherman House).

Yesterday I was out at the KR Training facilities and shot it.

First, since I was cold – both ways, in that I hadn’t shot yet AND it was in the low-50º’s with a very strong and cold wind – I shot the “3 Seconds Or Less” drill. 19/20 – dropped one of the weak-hand shots. Dang it; my nemesis strikes again.

Then I shot Claude’s accuracy drill. This is with my primary carry gun, a S&W M&P9 (full-size).

  • (3) 10/10
  • (5) 10/10
  • (7) 10/10
  • (10) 10/10
  • (15) 9/10
  • (25) 6/10

Even though 25 yards is not part of the drill, I did it anyways because I know I need more practice at 25 yards.

I ran a few other drills, shot some steel, did some other things.

What do I need to work on? Same as usual: weak hand, and 25 yards. And probably weak-hand at 25 yards too. 😉

I have been focusing on them. On weak  hand, it’s grip, finger placement, then pressing instead of yanking. In fact, on one-handed work in general, I am constantly reminding myself to keep my grip strong: thumb wrapped down and actively involved in the grip, and pinky crushing things as much as possible (involving the pinky matters a lot in a strong grip).

On the 25 yards I did observe and validate something I’ve been seeing in my dry fire practice: sight alignment. At 25 yards you really need that “type 4” sight picture (see: Brian Enos), everything has to be perfect. I know I’ve had some problems seeing the sights crisply during dry practice and that translated into live practice — where I was able to see the sights better. Still mulling through all of this in terms of what to correct, but it was enlightening. For sure, the 25 yards was all about sights and that I was less than perfect with that picture.

In other news, I think I’m going to have to swap out this gun and take it to the gunsmith. I think it’s just time for some love and care (e.g. new springs, new extractor, deep ultrasonic cleaning, etc.). I’ve been seeing little things here, little things there, and some things that happened yesterday pretty much clinched it.

Well, I know what my dry fire will be consisting of for a while. 🙂

2016-03-23 training log

Pfft.

Jack shit, and not even a good one at that.

Felt crappy this morning. My sleep hasn’t been great, work has been a massive source of stress, so I was drag-ass out of bed. Thought about skipping the gym entirely, but no… gotta go through. But I did decide to do a “Jack-Shit” approach (and then reduce my carb intake today) so I don’t dig a deeper hole to recover out of. Just do the squat work, 30 minutes on the elliptical, and call it.

As I started squatting, I felt a little better and thought about working up to my EDM because sometimes you should do that. I really don’t know why I did — I shouldn’t have. I felt bad, poor day, not recovering well, why would I think this was a good idea? Still, I did. And I failed. I put 305 on the bar, hit the hole, not sure I hit depth because I could tell it wasn’t going to happen… started to come out of the hole, got a few inches and just stuck… stuck… stuck… couldn’t make it move… so I dumped the bar. Not happy, but not too upset because I’m not surprised. I had good setup and mentality going into it, but it just wasn’t there physically. I’m not yet going to chalk it up to diet strength loss, but rather just feeling like shit, bad day, not recovering, etc..

After I dumped it I just hit the elliptical. No 5×5 work sets. My back didn’t feel too hot after the bar dump, so why risk more problems for myself

It was what it was.

  • Squat
    • bar x 5
    • bar x 5
    • 150 x 5
    • 175 x 4
    • 205 x 3
    • 225 x 2
    • 265 x 1
    • 285 x 1
    • 305 x miss

2016-03-21 training log

Today was solid. Saw progress across the board.

Weird that my bodyweight is up… have no idea why. This cut cycle is starting off on a frustrating note.

But as for the gym, went well. Biggest thing I’m happy to report is my shoulder/neck feels tons better. Movement is good, range is good. Still need a little stretching, but recovering well. I had thought about dropping weight and upping reps on the lat raises due to lat week, but nah…. opted to just continue on, and it went fine. Chalk it up to “one of those things”.

  • Bench Press (basebuilding model 1)
    • bar x 5
    • 120 x 5
    • 140 x 4
    • 165 x 3
    • 180 x 2
    • 205 x 1
    • 180 x 8
    • 180 x 8
    • 180 x 8
    • 180 x 6
    • 180 x 5
  • Incline Bench
    • 135 x 8
    • 135 x 8
    • 135 x 6
  • Lateral Raises
    • 25e x 10
    • 25e x 10
    • 25e x 8
    • 25e x 7
  • Overhead Triceps Extensions
    • 40 x 20
    • 40 x 20
    • 40 x 20
    • 40 x 16

2016-03-18 training log

Solid day.

Deadlifting went well. After I was warm, all the work sets went really well. For sure the speed was up over last week, and I know there’s still room to improve that to make the work sets feel like nothing, which is the goal. Happy here.

Chin-ups… 10 still eludes me, but I’m going to work every set to “failure”. Basically even if that “last rep” was barely chin over bar, still do another rep and fight it — I might get there, but even if I don’t, that extra work will do me well. Make the descent of the last rep really slow, and just keep working it and pushing it since this is bodyweight and tough to (over)load otherwise. I’ll get there.

One thing I thought about today was my quads.

See, I know when I deadlift that I really favor my back. I’m trying to work on that. My deadlift technique is shifting a little bit these days, starting with a closer stance to the bar and trying to really push the floor away from me when I start — get more leg drive into it, trying to keep the bar closer to me, etc.. But I know from looking at, well, everything, that my quads are weak compared to the rest of me (esp. my back and posterior chain). So I thought about it some, and I think after I’m done with this basebuilding session that I’m going to have to focus on my quads more.

For example, while I finish out this diet cut, I wanted to switch to just some freestyle hypertrophy stuff. I’m thinking out a plan for it, but I think a big part of it will be switching to front squats as a main movement (e.g. 5/4/3/2/1 workup, then a AMRAP set with 50% afterwards). And tho I’m thinking about 5/3/1 after I’m done with the cut, while I have been thinking about doing BBB template I may not and instead follow squats with front squats (something like a “simplest strength template” approach). I don’t know.

But I do believe if I want to hit my goals, I really need to bring my quads strength up. I’ve known this, and it just becomes more evident to me over time. Despite the fact I hate front squats, I think it’s time to focus on them for a good long time and work to bring up my quad strength. Probably other things too, like leg presses and one-leg bodyweight work.

Anyways, just thinking out loud.

  • Deadlift (basebuilding model 1)
    • 185 x 5
    • 215 x 4
    • 225 x 3 (whoops, should have been 255)
    • 285 x 2
    • 300 x 3
    • 300 x 3
    • 300 x 3
    • 300 x 3
    • 300 x 3
  • Chinups
    • bw x 9
    • bw x 6
    • bw x 3
    • bw x 3
    • bw x 3
  • BB Rows
    • 135 x 8
    • 135 x 8
    • 135 x 8
  • BB Curls
    • 30 x 40
    • 30 x 26
    • 30 x 21
    • 30 x 18 (then a couple rest-pause sets)

2016-03-16 training log

Another squat day. Just felt solid.

A few points of note.

That shoulder pain from the other day. My buddy Sam txt’d me and mentioned “levator scapulae”. I do believe that’s it. After much massaging, stretching, a little Advil at night, it felt better yesterday and even more so today. Still don’t have full range of motion, but close. It affected my squatting a little bit since it caused a little neck pain (bar pressure, etc.), but actually by the end of the squats it felt better than before I got to the gym. Huzzah.

When in doubt, crush-grip the bar. It makes a huge difference in everything. Being tight, as much of your body as possible being tight, leads to being stronger.

I am starting to think knee sleeves might actually do something for me (not just placebo). Wore them the whole time, but after the 3rd set of lunges rolled them down. On that 4th set, something in my knees was like “dude, you want the sleeves”. I can’t really describe it, but my knee did not feel as good as it had been and it was as if to say “yeah, sleeves help”. I’ll need to keep playing around, but it was the first actual bit of something to say “yeah, knee sleeves are good things (for me)”.

  • Squat (basebuilding model 1)
    • bar x 5 x 2
    • 150 x 5
    • 175 x 4
    • 205 x 3
    • 225 x 2
    • 260 x 1
    • 185 x 5
    • 185 x 5
    • 185 x 5
    • 185 x 5
    • 185 x 5
  • Leg Press
    • 225 x 10
    • 315 x 10
    • 365 x 10
    • 365 x 10
  • Lunges
    • bw x 12e
    • bw x 12e
    • bw x 12e
    • bw x 12e

2016-03-14 training log

All in all, today went well. I got a couple more reps over last week, so that’s proper progress.

The main bummer came with, of all things, lateral raises. I went up in weight. First two sets went fine. On the third set, around rep 4 sudden pain/twinge in my upper trap/left side of my neck. I tried to push through a couple more reps, but no go. It was painful. I dropped weight and was able to do a final set, so nothing major here. But damn if things aren’t hurting, even now a couple hours later as I write this. Something deep in my neck/upper-shoulder area is really tight. Turning my head side-to-side hurts, can’t get full range. I’ll probably be extra sore and tight tomorrow, and it may take up to a week before things are fully normal again. Just LOTS of stretching, massage, etc. throughout the day today. Ugh.

Ah well, shit happens. I don’t think it’s anything serious, but it’s enough to be a bummer. Just have to manage it out. Glad I’ve got my Thera-Cane: should help me work it out.

In other news, I’m still hanging in the 208 zone. This is NOT where I wanted to be 2-weeks into the diet. So Nick has really bumped things: dropped food intake some, and really bumped up the cardio (ugh). It’s now 1 hour walking on my off days and 20-30 minutes on my training days. Geez. I hate it but I really want this to happen AND I want to try to get this all in before the end of May. So if I want it, I gotta put in the work, and crank. All there is to it.

  • Bench Press
    • bar x 5
    • 120 x 5
    • 140 x 5
    • 165 x 3
    • 180 x 2
    • 205 x 1
    • 180 x 8
    • 180 x 8
    • 180 x 8
    • 180 x 5
    • 180 x 4
  • Incline Bench Press
    • 135 x 8
    • 135 x 7
    • 135 x 6
  • DB Lat Raises
    • 25e x 10
    • 25e x 10
    • 25e x 6 (ouch)
    • 15e x 15
  • Overhead Triceps Extensions
    • 40 x 20
    • 40 x 20
    • 40 x 16
    • 40 x 14

2016-03-11 training log

Good, but not great.

So deadlift basebuilding model 1. Really the day wasn’t bad, but I’ve not gotten the best sleep this week, work is quite stressful right now, and I’m still very sore from Wednesday’s squat session (always 2 days later).

The deadlifts moved slow. Not horrible slow, not grinding, but I just didn’t have the C.A.T. behind it. Things got better as I went along tho. In the end, it’s just a baseline for me to improve upon.

As for everything else, I’m going to continue with the 2-minutes-rest between everything throughout this basebuilding cycle. Only exception will be squats, since the model puts a time constraint. I expect a little more rest will be a little more useful for me.

Chins, 10 continues to allude me, but I’m going to get there.

Curls are supposed to be 100 reps nonstop. I’ve found that doesn’t do much for me, and the “inverse 100 protocol” is alright but again I wanted to try the consistency here with the rest of the program. So I picked a weight, goal is still at least 100 total reps, but crank as much as possible, 2 minutes rest, repeat until total is over 100. That felt a lot better than either 100-nonstop or the inverse protocol. We’ll see where it takes me.

While I’m working this, I can’t help but think forward because I know it’s just one more dietary cycle here then I’m off to achieve other goals. My thinking there continues to gravitate back to 5/3/1 because it’s dead simple and works. So then I think after I’m done with basebuilding and have time until 5/3/1 I may just “do whatever”. Hypertrophy work to support the diet cycle, and frankly just go into the gym, have fun, pull an Arnold and “chase the pump”, and just enjoy that before the work kicks in. 🙂

  • Deadlift
    • 185 x 5
    • 215 x 4
    • 225 x 3
    • 285 x 2
    • 300 x 3
    • 300 x 3
    • 300 x 3
    • 300 x 3
    • 300 x 3
  • Chin-ups
    • bw x 9
    • bw x 4
    • bw x 4
    • bw x 4
    • bw x 3
  • BB Rows
    • 135 x 8
    • 135 x 8
    • 135 x 7
  • BB Curls
    • 30 x 40
    • 30 x 25
    • 30 x 20
    • 30 x 19

2016-03-09 training log

Basebuilding Squat Model 1 is always interesting.

It’s just a lot of work in a little bit of time. You’d think 5×5 may not be much, but when you have to crank to get the work within a time limit, and push as hard as you can all the way through (C.A.T.) oh yea, it’s work.

I went ahead and opted to keep that same pace throughout: about 1 minute rest between everything. That was enough. By the time I got to lunges I could tell my work capacity had decreased some, so it’ll take me a little bit to get back up there.

For the record, I’m experimenting with lunge stride. Today I kept the stride fairly short.

Oh, and I opted to have no knee sleeves nor belt. We’ll see how that goes for me.

  • Squats
    • bar x 5
    • bar x 5
    • 150 x 5
    • 175 x 4
    • 205 x 3
    • 225 x 2
    • 260 x 1
    • 185 x 5
    • 185 x 5
    • 185 x 5
    • 185 x 5
    • 185 x 5
  • Leg Press
    • 225 x 10
    • 315 x 10
    • 315 x 10
    • 315 x 10
  • Lunges
    • bw x 10e
    • bw x 10e
    • bw x 10e
    • bw x 10e