It’s been over 2 years since I started going to the gym, but it’s been just over 2 years since I started on strength training programs. I started with Rippetoe’s Starting Strength (well, closer to a Practical Programming Novice program), hung on that for about 2 months, then switched to Wendler 5/3/1. I just finished up my 20th cycle on 5/3/1. So how do things look?

On my first day(s) of the PP/SS program, I worked my way up to:

Squat– 105 x 5
Bench – 115 x 5
Deadlift – 135 x 5
Press – 65 x 5

About a year ago I finished cycle 10 with these numbers (some were PR’s, some not):

Squat – 250 x 4
Bench – 205 x 6
Deadlift – 315 x 6
Press – 140 x 6

At the end of cycle 20 of 5/3/1 2 years later:

Squat – 295 x 3
Bench – 230 x 2
Deadlift – 380 x 3
Press – 155 x 3 (set on cycle 19)

And all those numbers are true PR’s, the best/most I’ve ever lifted in my life. Not too bad I reckon.  If you look at some strength standards I’m pretty much in line with where I should be… tho my squat still needs work.

That’s one thing that gets me. My squat. I used to hate it, fear it, and it caused one of my worst plateaus around 230# (what caused me to move off Rippetoe and onto Wendler, and even then). Now? Well, I’m still not saying I love squatting, but I can say that the day before I hit that 295×3 I was so excited and looking forward to the gym like never before. I was looking to crush that weight, not letting it crush me. 295 for a triple is happy.

Am I meeting my goals? I think so. My primary goal is to get stronger, and it would seem I’m doing that. My larger goal along this path is to have a 1000# total. And while on paper my calculated 1RM’s are almost there, again, that doesn’t matter. I want to MOVE that weight. I’m also not worrying about 1RM’s, so if it’s the weight I used for a triple or whatever, then so be it. Yes it takes me longer to get there, but I’ll be even stronger for it. I did want to hit 1000# by the end of 2013, but I’m skeptical if I’ll make it, just doing the simple math. But that’s OK, because I’ll get close and so long as I’m progressing well… then I’ll get there eventually. What probably makes more sense is for me to not look at the calendar year but training year, which would probably be “June to May” given when I started.

I am figuring I won’t make it before the end of 2013 because I’m slowing down. I’m not knocking out the rep PR’s. I’m backing off to prescribed reps only (tho I’ll allow myself some fun on 5/3/1 days). I’m getting beat up. I do feel better by scaling back, but a reset is likely to happen sooner or later and yes, that does drop down the total, thus I am suspecting 1000 in 2013 won’t happen. But again, that’s alright so long as I continue to make good progress.

The thing is, all of this is coming to a head. Am I still on the right path? I’ve been reading more Brandon Lilly, Dan Green, and other such guys. Cube Method is very interesting to me. Even the fact I ran a 5/3/1 cycle twice with the 2nd being for rep PR’s is alright for me (Clint Darden was even recommending such things). I’m reading more about how the strongest guys like Kaz or Ed Coan did a lot more rep work, like heavy work on 6-10’s, 5’s and triples, rarely going for singles unless peaking for a meet. There’s no question I have more muscle mass than ever before, but is it enough to sustain me? Do I need to gain more?

There’s a saying that the best program is the one you’re not doing. I originally took that to mean a “your program sucks” type of thing. And while perhaps it could mean that, it can also mean that nothing works forever. That perhaps I need a change.

My programming has been centered around 5/3/1 with mostly a “Boring But Big” approach. I have been experimenting with assistance work, but I’m really not at a point of having weak points or really being able to determine what they are; thus, assistance work tends to be ‘whatever’ which is why BBB works out (just keep moving and getting bigger). But I am starting to understand a few things, like I am pretty sure I need more quad work to get my squat numbers up there. And I’m finding that some higher-rep work and a little more of it on assistance stuff is good to my body overall. So I’m not really following any particular Wendler-made template, more following principles.

But I think about how a reset could be a blessing in disguise, doing more heavy rep work, working up more.  I even see how in many respects what I do with 5/3/1 isn’t that different from Cube… but I see where there are differences and how it could benefit me. I’m not sure I want to go to the Cube Method just yet, but I am very interested in it.

I do think I need some more bodybuilding work in my assistance efforts. And while the past some whiles I’ve been trying stuff like 100-rep work, that’s been very beneficial for me, especially on the kinesthetic front.  But I want to get heavier… 12-20 reps sort of thing, 3-4 sets, no more than 60 seconds between sets, etc.. try to get 50-75 total “heavy” reps instead, build more mass, hopefully that will carry over.

I just want to be a little less beat up, but keep on the road to 1000. I really don’t want to change my plan too much. But I do find myself being less dogmatic about 5/3/1 and sticking more to principles. I guess after 2 years of it, constant reading and rereading, and learning as much as I can… yeah, you start to figure it out on  the deeper and more important levels. But there is something to be said for starting out with a very specific plan, sets, reps, percentages, templates. I think some vets forget what it was like to be a beginner and get annoyed at such questions. I can see how it gets important to move beyond that, but beginners need to start somewhere and I think Jim gets that in his presentation of his program. I think I’m moving a little beyond it, but not quite there yet. That may be part of why I’m intrigued by Cube but not ready to go there yet.

So what’s going forward?

Primary goal remains strength. Secondary, mass building. Tertiary goal, keeping my fat levels in check. I don’t want to get lean, but I don’t need to blimp out either. Because when I hit 1000#, I am going to shift to fat shedding as the primary goal. What that program will be remains to be determined when I get to that point. For now, onwards to 1000.

My workouts going forward will probably be like this:

Squat
Pause Squat
Leg Extensions
Planks

Squat because that’s what you do. Pause squats because they seem to be the best thing for fixing “out of the hole” issues for raw squatters, and I’ve only done them one cycle and would like at least a couple more to see what they do for me; I’ll continue on the same 3 sets of 3-5 reps at moderate percentages (per Paul Carter’s suggestions). Leg extensions because I want to see about building my quads up more. They will be 12-15 reps, focused on extending the knee purely by contracting the quads, squeeze at the top, etc. (not about weight, about muscle). I suspect down the road pause squats and extensions will be replaced by front squats. Based on what I see in my squats and deadlifts, I’m suspecting I need some quad work. Planks for the abs, and they are a LOT more friendly on my elbows than some other ab work I’ve been doing.

Funny thing. While I was composing this, I read a posting in the Facebook Cube group. Someone was posting the results of their mock meet and they had a rather large disparity between squat and deadlift (small squat, big deadlift). Hrm, that looks familiar. A knowledgable person posted what I’ve been suspecting: quad weakness is attributed to such a thing. Solution? Deep front squats for sets of 8-12 reps. Heh.

I think I will stick with what I’m doing a little bit more tho, just because pause squats are kinda cool and I’d like to see what they do for me.

Bench Press
Incline DB Press
DB Rows
JM Press
Face Pulls

Bench is the main movement. Incline DB’s because I’ve read enough about DB work and incline work to convince me to try these as a way to build a little more mass, have more range of motion, and just overall improve for this movement. I think my shoulders will benefit too. I’ll do them heavy-ish, like 6-10 reps. DB rows will be Kroc-style, 2×10 to warm up, then 1 last set repping out. If I can hit 25 reps, time to increase the weight. JM Press and Face Pulls appear to have been helpful to me, but whereas before I was doing 100 reps straight, I’m going to break it down now to something like 3 sets, 12-20 reps, appropriately “heavy” weight.

Deadlift
Hyperextensions
Side Bends

That’s all for this. Deadlift. Then hypers for like 12-20 reps 3-5 sets. And side bends for about the same. I’m finding that the combo of hypers and side bends really knock the crap out of my erectors. So I’ll keep this combo up for a little while and see how it goes for me.

Press
Press again
Lat Pulldowns
Side Laterals
Rope Pressdown
Hammer Curls

Press is the main movement. Then do more pressing, but like 5 sets 6-10 reps; I just can’t think of a good replacement but why? This seems to really hit my shoulders well so long as I ensure I press fully, head comes forward, etc.. Side laterals because I do want to see if I can boost my medial delts a bit. Rope pressdowns for like 3 sets 12-20 to hit my triceps (rope works well, since I can then twist the wrist a bit for more squeeze). And hammer curls are just a favorite.

Generally speaking, striving for prescribed reps tho on 5/3/1 week I can try for up to 3 more if I really feel it. Work otherwise to get some reps at heavier weights, build muscle, get stronger.

Eat well.

Sleep well.

And 1000 will eventually be mine.