My new EDC Flashlight – SureFire E2D

For the past 3-4 years, I’ve carried a SureFire E2L Outdoorsman as my every day carry (EDC) flashlight. I carry a flashlight all the time and at the ready because it’s useful. I didn’t realize how useful it was until I started carrying one all the time — I use it almost every day.

But over the years of carrying the E2L, my preferences have changed and a couple months ago I started on a quest for new EDC flashlight. I’ve hit a milestone on that quest – I’ve obtained a new flashlight, a SureFire E2D LED Defender

SureFire E2D LED Defender

First, it’s important to note this is the LED model; there’s earlier versions of the E2D that were not LED. Second, you’ll note the different tailcap in the above picture; I’ll discuss that below.

Why did I pick this? Because it fit all my requirements.

  • I wanted a higher beam output than the E2L, and with 200 lumens the E2D certainly meets that.
  • It has a better beam quality, but I’ll discuss that below.
  • The first click on the E2D activates the high beam (E2L, the low beam). My needs these days find me needing “most light, right now”, which means I want the first press of the button to give me a solid beam of lots of light.
  • It has a clip, and a clip in the “right” direction for my needs. One of my biggest uses of the clip is to hang the light from the brim of my cap so I can illuminate whatever I’m looking at (hands-free), and of course the beam moves with my head and eyes.
  • High and low beams, because while much of my current needs are “most light, right now”, sometimes I need to read something or see something else, so low beam is good. And no strobe.
  • The form factor is right for my hand, for my carry, etc.. BTW, my existing Comp-Tac flashlight pouch works just fine because the E2D and E2L have just about the same form factor. I did note I needed to tighten up the pouch a little bit for the E2D to fit, but that’s not a big deal.

So… my needs were met, thus.

Regarding the beam quality, from what my eyes can tell it’s actually pretty much the same beam as the E2L. But because it’s more lumens, things just look better. So I reckon it’s not so much the beam as it was the strength. To compare, the Streamlight Super Tac-X I have also has a 200 lumen output, but the beams of the Tac-X and the E2D are different — this is due to the reflector. The Tac-X is designed to really throw that light, so the beam is a little more focused and appears to reach further. The E2D certainly reaches far, but the light is… well, the best way I can describe it is closer to a floodlight than a spotlight, but it’s certainly not some sort of “room-filling” light… it’s still more spot than a ceiling lamp, but I’d just say the E2D’s beam is a little more “spreading/filling” than the Tac-X. That’s fine for my needs, because while I do want the throw, I also need the “fill”. What I’d really like to do is get out in the country where I don’t have the light pollution of the city and really see how the beams compare.

The clip is shorter but VERY strong. It’s tough to get under it, whereas the E2L’s is longer and “looser”, very easy to get under. That’s fine, if over time it means more durability and less chance of accidental snagging of the clip.

In the few days I’ve had the light and used it, it’s worked well and I’ve been pleased. It’s what I’ve been after.

However… not everything is rosy.

SureFire E2L (top) and E2D (bottom)

See the above picture and compare the two lights. Certainly they are cut from the same cloth, the difference being the E2D has this “Defender” styling. That’s a bit of a mixed bag.

First, the crenelation is of course part of the purpose of the thing. But it’s a little sharp. While of course that’s part of the point, when you pull the light in and out of the belt pouch all day AND the light is up against your bare skin well… sometimes I skewer myself. Just annoying.

Second, the this affects the accessibility of the tailcap button. Notice in the picture you can see the E2L’s button but you cannot see the E2D’s. They rise up the same, just the E2D has the “walls” around the button. I found this made it difficult for me to activate the button. When I hold the light and hit the button with my thumb, either I’m holding it wrong or I just don’t have enough thumb meat to get that button depressed. For me to work it, I have to come at the button with my thumb pointing down into the button and use the tip of my thumb – hardly practical for me. When I grab the light, regardless of how I grab it, I should be able to just press and go, but alas, the tailcap doesn’t allow it. Thus why you see the mixed light in the top picture – I just switched to use my E2L’s tailcap. It works fine.

Third, note the texturing on the body of the flashlight. It’s a bit more aggressive on the E2D. That’s great for a grip, but in the pouch, on my belt, against my skin? It’s sandpaper. It’s not majorly uncomfortable, but there’s enough times when I bend or twist my body just so and get rubbed and it’s annoying.

All in all these annoyances are minor, but I’ve also only had the light a few days. Over time I may grow to hate them or they’ll fade into the background and I will barely notice them. Time will tell.

But for now, the E2D stays on my hip as my new EDC flashlight.

6 thoughts on “My new EDC Flashlight – SureFire E2D

  1. I didn’t see much description of how you carry the flashlight. It seems a bit too big for pockets, do you attach it to your belt? Or is there some other way of keeping it on your person?

  2. Since I’m on a similar quest, did you look at Fenix PD32 300 lumen light and if you did why you went the Surefire way ?

    • I can’t recall if I looked at that specific model, but I do recall looking at least at one of similar ilk. One thing I did not like was the memory circuit. While that’s cool that it remembers your last brightness setting, I wanted to have my first press on the button ALWAYS be bright(est). I didn’t want to use the lowest light, then next time I pull it out click and get low when I expected high, y’know? Or have to always remember to reset it back to high because well, I’m human and I forget. I think it’s a good idea, just wasn’t suitable for my particular use case.

      But I could see such a light being useful for something like having it in the car, or taking on a camping trip, etc..

  3. Pingback: AAR – KR Training 2013-03-09 – DPS2/AT-2/AT1-A | Stuff From Hsoi

Join the discussion!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.