Previously I wrote about a hunting AR.

Excitement got the best of me (and my wallet) and I went ahead and ordered a Burris Fullfield II 3x-9x-40mm rifle scope, the Burris AR-P.E.P.R. Mount, and a few other little things to go along with it (e.g. covers). Not so much that I want to modify the rifle, but more that the sooner I get this set up the sooner I can get my kids shooting with it. The sooner they can start shooting, the sooner they can practice, the more the practice the better they get, and eventually I can take them hunting. In the end, it’s all for the kids (but I get to play with new toys too).

I took it to the local indoor range this morning to sight it in. I started off having them do a bore sight. Note that the P.E.P.R. mount is 1″ to the bottom of the rings, 1.5″ to the middle of the scope. That’s rather high up over the barrel. You can see in the picture that I probably don’t need to be that high, probably could go with something like Burris XTR medium rings and drop about 0.5″. But this is fine. Trouble was, the guy doing the bore sighting couldn’t get it to work. He used this little deal they stick into the muzzle then when you look through the scope you’ll see a grid and line up on the grid. He had to put in a spacer to put it a little higher due to my higher mount, and I can’t help but wonder if that didn’t line things up right. Reason I wonder is because he cranked the adjustment knobs on the scope about as far as they’d go and couldn’t get things lined up. Not good.

It’s always possible the scope shipped broken from the factory… things like that can happen. While sitting there at the range/store they tried to talk me into buying a Leupold scope, but they were all $300+ and I’ve already spent more money than I should have lately so I wasn’t looking forward to that. I know this scope and mount setup should work, so if I just had to exchange the unit I’d rather do that…. but having bought from MidwayUSA any returns/exchanges would cost me money in shipping so I wasn’t looking forward to that either. I opted to put the rifle back in the case and look into it more when I got home. Spent my time checking out my handgun reloads, then went home.

The Second Opinion

I called Burris and spoke with a product support person. We checked out what we could on the phone and by all signs the scope was fine. I reset the dials to a midpoint, then called my local Academy sporting goods store. I seem to recall they did bore sights for free. So I figured to get a second opinion, it’d just cost me a little time. I figured if results came out the same as from the range, then the scope was likely FUBAR and back it would go. If the results didn’t come out the same then great.

The Academy had a similar muzzle-based bore-sighting setup, but no way to raise it up for my higher mount. So the guy pulled out a laser sighter, one that is shaped like a round that goes into the chamber, shines the laser down the bore, and off you go. We were only able to back up to about 18 yards, but that’s good enough. Sure enough, as soon as we turned on the laser, it wasn’t too far off on adjustment. Got it dialed in close enough, then I went back to the local indoor range. Saw the same guys there and told them I got a second opinion and smiled.

Went into the range, started at 25 yards and was on paper. Adjustments here and there, dialed in good. Went back to 50 yards and tweaked it, then back to 100 yards to get it properly dialed in. At this point the rifle is shooting well enough given the fact I’m using Georgia Arms Canned Heat, the heavy (crappy?) Bushmaster trigger, and whatever limits there are in my skills. Frankly the biggest thing I was longing for was a better trigger. But overall things are fine.

It was good to get a second opinion. I doubted that the scope was busted and doubted a problem with the setup as it’s common enough. Sure it cost me a little time, but no big deal in the end.

Next up… taking the kiddos to the range to get them comfortable shooting this setup! 🙂