3 ounces isn’t very much, is it?

TSA limits us to 3 ounces of liquid in our carry-on luggage.

I think we’ve all agreed this isn’t much, and doesn’t really provide us with enough to get the job done. Doesn’t matter what the liquid is, be it water for drinking or shampoo for your hair — it’s not enough to get the job done.

Well to be fair, maybe it gets you through; maybe some people get by alright. I know most men have short hair and 3 ounces of shampoo is perhaps enough for them. I’ve got long hair and 3 ounces doesn’t cut it; maybe one shampoo, but if I need to wash my hair a second time? Forget it.

These reduced capacity containers just don’t work for all situations. Yes perhaps it works for the statistical average, but statistics are of little comfort when you’re the anomaly (and no, I’m not going to cut my hair).

We supposedly free citizens are restricted in our liquid carrying capacity for our own safety. We acknowledge it may not get the job done, it may leave us in a lurch… but at least it’s just shampoo, nothing that’s difficult to obtain no matter where you go, and your life generally doesn’t depend upon it.

I think about other contexts where capacity is limited, and the same principles apply. That restricting the amount of ammunition law-abiding supposedly free citizens can carry or possess may not be enough to get the job done. Oh sure, statistical averages say you’ll be attacked by a single person, but that doesn’t mean your enjoyment of your Starbucks won’t be interrupted by a violent mob of 25 pipe-wielding people.

Think about applying this sort of capacity restriction across the board in your life. If all liquids could only come in 3 ounce containers. Your milk, your coffee, your soda (wait… this might give Bloomberg some more ideas), your housecleaning supplies, gasoline… we wouldn’t stand for it because we know it’s a silly restriction and causes more problems than it solves. Yes… causes more problems than it solves.

2012-11-05 workout – Wendler 5/3/1 program, cycle 14, deadlift 3

Nothing like a little motivation.

“Week 3”

  • 5/3/1 – Deadlift (working max: 335#)
    • 1x5x135 (warmup)
    • 1x5x170
    • 1x3x205
    • 1x5x255 (work)
    • 1x3x290
    • 1x5x320
  • Asst. #1 – Deadlift
    • 1 x 5 x 275
    • 1 x 5 x 225
    • 1 x 5 x 185
    • 1 x 5 x 135
    • 1 x 10 x 135
  • Foam Rolling

It feels good to feel stronger again. I’m still not at the levels I was, plus I did reset because my deadlift form has changed a bit. But all feels good and I just felt good pulling today.

Given my recent thoughts about lifting and revamping my approaches, I opted to try stripping down. Instead of 5×10 across with some light weight, let’s just strip down by 45’s and 25’s, pulling 5 reps, resting about 60-90 seconds between sets… and the last set I repped out.

It felt good. It helped me feel good about the this new approach. I’m solidifying my workout plan for the next some cycles to see how they’ll fare for me.

The thing is tho… I drove to the gym because of my ankle. While driving home my posterior chain started to hate life, so as soon as I pulled into the driveway I took a walk around the block just to cool down. That helped me ease back in, plus I can tell that my ankle is about as good as it’s going to get. I’ll wear my really good running shoes, and I’m going to get back on the wagon with walking. Once I’m feeling better there, I hope to start pulling the sled again.

Life’s good.

Workout reassessment

If you come here for the not-workout articles, leave now. 🙂  If you read the workout stuff, read on.

So my primary goal has been trying to shed the fat. I managed to drop 10# and plateaued. The fat loss work was driving me crazy. Too little to eat, stress of job and life, and it just drove me batty. I tried various adjustments of diet and plan to make it a little more manageable. For example, instead of spreading it out over 5 meals, try 4, or try 3. That helped to a degree, because I could have a meal and feel better in that meal… felt more satisfied, not so much like I was denying myself.

Still, I stagnated. I probably needed to drop my calories even more. But I am really hating that because I’m losing too much strength. My workouts are becoming less fun. But I am liking my switch back to a simpler workout program, basically the Wendler 5/3/1 program Boring But Big template. I cannot deny how much I like that program.

I also opted to start to find a different route to caloric and thus flab-reduction goals. I learned that I do need carbs to some extent. I cannot cut them out like I was doing when I was striving to be paleo — my body just won’t function well without some carbs. By my carb choices have changed a lot, settling on things like Ezekiel bread and brown rice, maybe some more carb-heavy veggies like squashes and whatever comes in our CSA box. I’m still toying with my macros, and currently leaning towards something like 1.0 to 1.5 grams of protein per pound of bodyweight, and then maybe 0.5 or so grams of carbs per pound with fats being as minimal as possible but not sweating it too much. Basically, keep protein high and carbs low, giving me what I need to get through but no more. I’m still working to find where that exact balance is.

Then I want to change up my workout.

I’m going to stick primarily with Wendler 5/3/1 and BBB, but I’m thinking about some minor modifications. I’ve been reading a lot about powerbuilding, with guys like Josh Bryant and Metroflex. Trouble is, I’m trying to glean principles — what is it that makes it not powerlifting, not bodybuilding, but this new thing “powerbuilding”. Well, it’s not really new… but just like with 5/3/1 you can look at a lot of specifics but also fall back to see what Jim’s guiding principles are, I’ve been trying to glean out some principles in powerbuilding. I may not be on the exact right course, but I have some ideas of things I’d like to try throwing in.

One thing I’m thinking about is changing the movement assistance work. That is, BBB says to take your main lift, drop the weight to 50-60%, then go 5×10 across. Well, when you do that, if you want rep 10 of set 5 to be tough then rep 10 of set 1 is pretty easy. Or if you make rep 10 of set 1 really easy, then it’s tough to get all 10 reps out of set 5. Well, what if instead every set and every rep was tough to get 10 reps? The way to do that is vary the weight. So set 1 uses X amount of weight, and set 5 uses Y, with Y < X. In essense, you’re doing drop sets, or rest-pause, just that the rest might be a little longer (60-90 seconds).

Another thing is what I just did on the bench press 14-3 workout, throwing in some “pump sets” at the end. In that workout I did all my work, then did a set of flies with light weight and high reps to failure; immediately followed by rope-handle triceps pushdowns with light weight high reps to failure, dropping the weight, and continuing to failure; immediately followed by barbell curls with light weight and high reps to failure, dropping the weight and continuing to failure. Basically, just get a pump. I didn’t do much this first workout because I knew doing just a little bit would be enough to make me sore… work up to more sets of this.

Exactly what I’ll do, I’m not sure. But basically I want to lift more… heavier, more reps, more volume. Keep 5/3/1 for a core strength foundation, but do a little more work to get me pumped both in terms of muscle growth and my heart rate. I’m continuing to pour over the powerbuilding documents that I can find, to see what I can glean.

As an interesting aside… one thing I opted to get back to doing is pull-up/chin-up work. I considered buying a set of bands to assist me, but while searching around I stumbled upon this video from Scooby:

I might see about adding that in. I’ve read all the various ways to get your chin-up reps up, but stagnated in my progress. He’s laying out a nice progression here using all those same sorts of steps (negatives, holds, assistance, etc.), so it seems like a program worth trying. I’d probably start with his step 3 or 4. Not sure where or how I’d work this in, but it does fit nicely with my 2x week workout.

The other thing I need to do is get back to conditioning work. My ankle is just going to be what it’s going to be. Oddly, the more I’m getting back on it, the better it feels. It actually makes sense, and as long as I’m careful about it I should be OK. I’ll probably start out just doing some brisk walks. Once things are really feeling better, I hope to get back to dragging that tire sled.

I’m hoping these things will help me get closer to my goals. Yeah, I won’t shed the fat as fast, but you know what? If it takes me 6-9 months, if I’m working hard, if I’m feeling good, then so what? I can live with that. Hell… if it basically allows me to drop 1-2# a week and not be miserable, still feel like I’m making progress in all desired areas… heck, I’ll be OK with that sort of results. I’d rather be in this for the long haul.

I’ve got a bunch to still think about in terms of exactly how to mesh this all together, but these are the thoughts going through my head right now.

Epitomizing the Warrior Ethos

A Gurkha soldier who single-handedly defeated more than 30 Taliban fighters has been awarded the Conspicuous Gallantry Cross by the Queen.

Corporal Dipprasad Pun, 31, described how he was spurred on by the belief that he was going to die and so had nothing to lose in taking on the attackers who overran his checkpoint in Afghanistan.

His gallantry award is second only to the Victoria Cross – the highest honour for bravery in the face of the enemy.

Read his full story.

20 squat mistakes

From Dave Tate:

Squat Mistake #1 – thinking it’s not technical and simple.

Squat Mistake #2 – not setting up TIGHT from head to toe.

Squat Mistake #3 – not arching the bar out of the rack.

Squat Mistake #4 – not starting with an arch and ass back.

Squat Mistake #5 – pulling air into your chest and not your belly.

Squat Mistake #6 – looking up instead of driving head and traps into the bar.

Squat Mistake #7 – not spreading the floor and pushing your knees out.

Squat Mistake #8 – sitting down instead of back.

Squat Mistake #9 – moving hips first out of the hole. The head and chest must move back first.

Squat Mistake #10 – not using compensatory acceleration on the concentric phase.

Squat Mistake #11 – looking down when the lift gets hard. When it gets hard, drive head into the bar.

Squat Mistake #12 – not using a box squat in one form or another.

Squat Mistake #13 – not squatting with people stronger than you.

Squat Mistake #14 – thinking there is a huge difference between squat training for raw vs. geared.

Squat Mistake #15 – not having an honest person watching your depth.

Squat Mistake #16 – slacking on training your core.

Squat Mistake #17 – being a pussy that is scared of big weights.

Squat Mistake #18 – not rotating bars – this can allow for same volume and intensity with a reduction in workload.

Squat Mistake #19 – thinking you know it all when you don’t know “squat.”

Squat Mistake #20 – technique is CRITICAL!!! This is how we get beginner – advanced lifters break PRs in 1.5 hours of seminar coaching.

 

I need to put this on the wall in front of me.

2012-11-01 workout – Wendler 5/3/1 program, cycle 14, bench press 3

Today wasn’t just setting a PR, it was achieving a milestone.

“Week 3”

  • 5/3/1 – Bench Press (working max: 235#)
    • 2x5x45 (warmup)
    • 1x5x95
    • 1x5x120
    • 1x3x145
    • 1x5x180 (work)
    • 1x3x200
    • 1x3x225 (PR)
  • Asst. #1 – Bench Press
    • 5 x 10/10/10/10/6 x 135
  • Asst. #2 – 1-Arm Dumbbell Rows
    • 5 x 10 x 60
  • Then I grabbed a set of light dumbbells and did a set of flies to failure. Then a set of triceps rope-handle pushdowns to failure, drop weight, continue to failure again. Then grabbed a barbell and did curls to failure, drop weight, continue to failure. Pump, baby.

Today wasn’t just a PR, it was a milestone.

I’ve NEVER bench pressed 225 in my life. 225 is a milestone because that means you’ve got 2 45# plates on each side of the barbell: 135, 225, 315, 405, 495, 585, etc.. are the “round numbers” of weightlifting. I’ve been long looking forward to hitting this milestone and finally did it after much setback.

Gym owner was spotting me… said I probably could have gotten 5, but I was happy with 1. I was totally distracted. He was standing over me, very close, totally in my field of view, and it distracted me far more than I thought it would. So I was thinking more about him than the bar path, the weight, etc.. He was doing the right things spotting, it just threw me more than I expected so I figured 3 was good enough lest I risk hurting myself. There’s more reps to do later. 🙂

And doing the final little pump set? Well… I’ll have to write about my recent rethinkings. That’s coming once I have time to write.

In terms of next big milestones, I’m looking forward to 315# squat, 405# deadlift, 185# press… and the 1000# club. It’ll be some time before I get to those, but every day is progress in some way. Of course, the next little milestone is just another 5#, another rep, doing better than I did before.